Your shopping cart is empty.
This acrylic case is designed for the Raspberry Pi 4B with a one-to-one correspondence of hole positions. The cooling fan and camera bracket can be installed and are compatible with 3.5-inch displays. The top cover is easy to open and close for easy wiring. When installing a 3.5-inch display, there is no need to install a top cover and a cooling fan. This acrylic case is installed without a screwdriver and has a bayonet design for easy installation. Be sure to watch the video during installation. Acrylic materials are brittle, improper installation or violent installation may cause the outer casing joint to break.
- Designed for Raspberry Pi 4B
- With Cooling fan
- Compatible with 3.5inch screen and camera bracket
- Easy assembly and connection
Acrylic board *6
Cooling fan *1
Camera Bracket *1(Option)
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
The bad: no instructions included. The good: they have a lot of product photos that I used to figure out how the pieces go together.
The good: pieces weren't scratched, because they still had the paper on them that is applied before cutting. The bad: you'll spend 15 minutes peeling them off before using the case.
The good: Easy to assemble. The bad: easy to disassemble. I had to use the cutoff ends of some zip ties to wedge into the four slots to finalize the assembly.
The case broke while putting it together. I am only using the bottom.