12DOF Robot Dog DOGZILLA S1/S2 for Raspberry Pi 5(ROS2-HUMBLE)

Save 1%
YahboomSKU: 3000200625

Main control board: Without RaspberryPi
Vesion: S1
Price:
Sale price$660.00 Regular price$670.00
Stock:
In stock

Description

Shipping and delivery Information

Payment & Security

Customer Reviews

Based on 20 reviews
75%
(15)
20%
(4)
5%
(1)
0%
(0)
0%
(0)
V
Viktor Smirnov
Delivery was good.

Yahboom delivery speed is really fast, and I want to start it as soon as possible, but I haven't received the Raspberry Pi board I purchased from another store yet. Lol

K
Katarina Novak
The overall is OK, but there are some shortcomings.

First of all, I am not very satisfied with the logistics. Although the delivery speed is fast, the outer packaging is a little worn during transportation, as shown in the picture. When I opened it, I was a little worried whether the accessories inside were intact. Although there was no damage after the final inspection, this still made me a little uneasy.
Although the packaging is simple, the internal division is well done, and the accessories are all complete without omission.
Speaking of quality, the shell and structural materials of the robot dog look good and give people a relatively strong feeling.

Tomorrow I will take it to my laboratory and start my project. I will contact technical support for any questions, and I hope they can get back to me as soon as possible.

M
Mikhail Andreevich
I am satisfied with everything except for the price

I am satisfied with the design and functionality of this bionic robot dog.
It has complete accessories, smooth movements of the robot dog, and can customize various behaviors through programming, making it very suitable for learning robots and programming. The overall workmanship is also exquisite, using high-quality materials.

The only downside is that the price is a bit expensive, which may cause some hesitation for people with limited budgets.

M
Markus Wittich
Dogzilla S2 Robot Dog

Das Paket wurde sehr schnell und zuverlässig geliefert. Beim Auspacken waren alle Teile wie beschrieben vorhanden. Die Anleitung bzw. Videos zur Montage sind leicht verständlich und sehr gut. Das Gerät lies sich entsprechend gut montieren. Leider war das Gerät im Bereich der Vormontage durch Yahboom bereits defekt geliefert worden. Eine Inbetriebnahme war nicht möglich. Der eingeschaltene Support war jedoch sehr bemüht den Fehler zu finden um das Gerät doch noch zum laufen zu bekommen. Leider war der Fertigungsfehler bei meinem Gerät unreparabel. Das Gerät wurde wieder verpackt und wird demnächst vom Lieferdienst abgeholt und wieder zu Yahboom zurückgeschickt um es dort im Werk zu reparieren. Die Qualität der Einzeilteile würde ich als sehr gut bezeichnen. Alles passte und fühlte sich sehr wertig an. Das mein Gerät hier defekt war kann ein Produktionsfehler gewesen sein. Von mir bekommt die Fa. Yahboom 5 Sterne für die Qualität und den erstklassigen Service. Es wurde ein weiteres Gerät von mir bestellt das demnächst eintrifft. Ich gehe davon aus das die Reparatur bei Yahboom erfolgreich sein wird und der Robo Dog dann sehr gut funktionieren wird.

L
Lepp Weld
Superb Quality Hardware

I have recently assembled several different mobile robot kits, and DOGZILLA is undoubtedly the highest quality.

QUESTIONS & ANSWERS

  • We are considering buying Robot Dog S2 without RaspberryPi. We have a RaspberryPi 5 4G, can we attach it to the robot myself? Also, do I need to do any setting?

    Hello friend,
    If you buy Robot Dog S2 without RaspberryPi, you just need prepare Raspberry Pi 5 board, without the need for anything else, as our kit includes everything you need.

  • How to solve the problem as below: Error loading page Domain: undefined Error code: -1 Description : net::ERR_CLEARTEXT_NOT_PERMITTED

    Hello friend,
    Technical support is unable to reply here. Please send your question to this email: support@yahboom.com

  • Happy New Year! 1) Does your pre-loaded SD/TF card for dogzilla also work with an 8G Raspberry Pi 4B? 2) What's the difference between "official" and "sub"? Thanks!!

    Hello friend,
    Sorry for late reply. We just ending Chinese new year holiday. And back to work today.
    1. Yes. pre-loaded SD/TF card for dogzilla also work with an 8G Raspberry Pi 4B.
    2. official= NVIDIA's core module+NVIDIA's carrier board;  sub= NVIDIA's core module+Yahboom's carrier board;

  • I have a DOGZILLA-S1. What are are all the parts to upgrade to S2? lidar and intelligent voice module.

    Hi friend, S1 cannot be directly upgraded to S2 because their hardware circuits are different.

  • Can dogzilla-S2 traverse stairs?

    It can't.

  • tracking and following me code

    Hello friend,
    Your means is that you need this robot dog code, Right? 
    You can check this tutotial link: http://www.yahboom.net/study/DOGZILLA-S1

  • I want to use Python to interact with and change some programs for this robot. Do you have any instructions on how I can do things like this?

    Hello friend,
    We can provide technical support for the daily use of the product.
    If you need to modify the code, it belongs to your extension and we cannot provide more technical support.

  • Does the DOGZILLA support an option with the robot arm?

    Hello friend,
    At present, we have not carried out such a design. Once we have it, I will let you know. Thanks for your attention to Yahboom.

  • My Dogzilla is working fine with a controller but doesn't want to connect to the app. I changed the IP address and left the default 6000 for port and 6500 for video. Can you help?

    Hi friend,
    Thanks for your support to Yahboom products.
    Please send your question to this E-mail: support@yahboom.com. Our technical support will help you solve the problem ASAP.

  • hi, i'm Ignacio From Chile. i bought a dogzilla and i was using it all normal, but after its battery ran out, after charger it no longer stand up normally, one of their legs is totally contracted, and 2 legs are not responding (the 2 left legs) the front right leg is totally contracted and the right back leg seems normal. i find a calibration file but i no want run it until you can answer me if is safe run the file or looks like other issue i hope that you can help with this pls thx for reading me

    Hello friend,
    We can reply you here. Please send your question to this E-mail: support@yahboom.com. Our technical support will help you solve the problem ASAP.

  • Can it be used with a Jetson Nano, instead of a Raspberry pi? Do you offer the codes for Jetson Nano, if it's any different?

    Hello friend,
    This Robot dogs don't support Raspberry Pi. All the codes and tutorials we provide are based on Raspberry Pi, which is incompatible with Jetosn NANO.
    Because the size of the Jetson NANO is too large to be installed on the mechanical dog, we chose a smaller rRaspberry Pi.

  • Can the robot climb a step? (i.e. can it walk up a staircase)? If so, what is the max height of the step it can climb? (i.e. How tall is the tallest object it can walk on it)

    Hello friend,
    Robotics dog can support a maximum climbing height of 2cm.

  • The documentation mentions ROS2 - are there any drivers or setup for this dog? I looked on github and your dogzilla download and don't see anything that mentions ROS2.

    Hello friend,
    Sorry. About this robot dog, we didn't provide any tutorials for ROS. Because it is not based on ROS

  • Can I use a Raspberry Pi 3 until the 4 becomes more available (and the price comes back down)?

    Hello friend,
    Thanks for your Email.
    Yes. You can use Raspberry Pi 3. But  some complex algorithms and video transmission may get stuck. Because the calculation capacity of 3B board is lower than that of 4B board.

  • Are the batteries removable for charging or swapping? What is the maximum step height it can climb? Thank you!

    Hi friend,
    Sorry for later reply.
    1. It used was a rechargeable lithium battery, which was installed inside the body of the robot dog and could not be disassembled.

    2. Maximum climbing angle 15 degrees

  • I'm assuming an 8GB Pi will work just fine - is that true?

    Hello friend,
    Sorry for late reply. There is some time difference between us, so I can't reply to you in time.
    Of course. Raspberry Pi 8GB/4GB board can used on it. 
    Any other questions, contact me again, i will reply you ASAP.

  • What's the warranty policy for this product?

    Hello Friend, 
    Sorry for late reply.
    All our products are 90-dasy warranty for parts/repair and Lifetine free technical support.

  • Can we add our code to grant additional features for the dog?

    Hi friend,
    Yes, you can write your own code to grant additional features for the dog. And we also provide a lot of code for reference.
    Tutorial link: http://www.yahboom.net/study/DOGZILLA-S1

Estimate shipping

You may also like

Recently viewed