Description
Le boîtier CUBE NANO est un boîtier de protection spécialement conçu pour les cartes de développement NVIDIA Jetson. Fabriqué à partir d'une plaque métallique laminée à froid en forme de C et d'un matériau acrylique de haute qualité, il offre une protection complète et un support stable pour les cartes Jetson. Il ressemble à un mini boîtier d'ordinateur, avec un ventilateur de refroidissement intégré, une barre lumineuse colorée RVB, un écran OLED et des boutons d'alimentation et de réinitialisation. Compatible avec les cartes JETSON ORIN NANO/JETSON ORIN NX/JETSON NANO BO1/JETSON XAVIER NX/JETSON TX2-NX.
Caractéristiques
Fonction de protection puissante : elle peut efficacement empêcher la carte de développement Jetson d'être endommagée par des collisions externes, de la poussière ou d'autres substances et prolonger sa durée de vie.
Transparence parfaite + affichage OLED en temps réel : le côté est en matériau acrylique translucide, de sorte que vous pouvez voir clairement l'état de fonctionnement de la carte de développement.
Interface pratique : les trous à l'arrière du boîtier correspondent un par un à la carte de développement Jetson, et l'appareil peut être branché et débranché sans retirer le boîtier.
Conception de dissipation thermique exquise : il existe des conduits d'air de refroidissement à double passage supérieur et inférieur pour garantir que la carte de développement maintient toujours un état de fonctionnement stable pendant les calculs à forte charge.
Lien vers le tutoriel
Expédition et livraison
Paiement et sécurité
Paiement
PayPal
Le principal mode de paiement est Paypal. Si vous avez Paypal, c'est parfait. Vous pouvez simplement passer commande et régler en quelques étapes. Si vous n'avez pas de compte Paypal, vous pouvez l'enregistrer et payer par carte de crédit ou de débit.
Payer avec Paypal
Payer avec une carte de crédit ou de débit
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
Customer Reviews
Im didnt recieved the invoice for this products
Hello,
We're sorry that an invoice couldn't be automatically generated and sent to you.
If you require it, please contact us and we'll arrange it.
Please check your email; the invoice has been sent to you.
Thank you for your understanding.
Have fun!
Yahboom Team
Tiny case with RGB light and for cooling
The whole process went smooth, order, shipping
Product is great quality and works as described.
The software documentation online is a little difficult , but product is great !
This Jetson NANO protective case kit is really great!
Not only can it perfectly fit the development board, but the appearance is also simple and atmospheric. The protective shell material is very sturdy, effectively preventing hardware from being damaged by external factors. The installation is also very simple, without worrying about complicated steps. The heat sink and fan design in the kit are also very thoughtful, and the development board can maintain good heat dissipation even with high loads.
I am responsible for school procurement. We purchased 30 cases from here.
Just received the package, which is consistent with what is shown in the video and pictures.
The quality of the packaging box is also very good. After a long-distance transportation, the internal parts have not been damaged. We plan to purchase another 20 next month.
QUESTIONS & ANSWERS
-
Hello, I am interested in purchasing the Yahboom Acrylic Protective Case for NVIDIA Jetson Orin Nano Super Developer Kit. Before ordering, I would like to clarify a question about camera installation: • Does this case provide a dedicated opening or slot for a CSI camera ribbon cable to pass through from the board to an external camera? • Is a camera bracket included or supported, and if so, where is it located on the case? • Will the ribbon cable fit without bending or damaging the connector when installed in the case? I would greatly appreciate any photos or guidance showing how a camera can be installed in this case. Thank you very much for your help.
Hi,
we apologize this product does not have a pre-installed interface for a CI camera.
If you don't tighten the transparent acrylic too much, leaving a small gap, installing the CSI ribbon cable should be fine and won't damage it.
Hope it helps.
If you need more technical support plz email to: support@yahboom.com
Best regards!
-
I have tried installing the drivers many times, but I cannot get the expansion board to show up on the i2c bus. Any ideas?
hi,
please email to the tech support with your video and order number: support@yahboom.com
and we will reply you online asap.
have a nice time!
-
Hi, I tried to use this case in Jetson Orin Nano. But OLED doesn't work. I followed the tutorial mentioned in http://www.yahboom.net/study/CUBE_NANO, and set the wiring correctly. But OLED doesn't display. When I add debug message, and it said that "Remote I/O Error" Can you help me about this? Thanks
Dear,
Send your questions to this E-mail:support@yahboom.com
Technical Support will reply you ASAP.
-
the attenna connectors appear to small for the wifi card. i look at under magifying glass and the ones sent with nano have much smaller neck making impossible to install on wifi card. i can add and remove the connectors that came with the orin nano easily. but your attena connectors dont fit.
Hello friend,
It sounds like your installation method is incorrect. Contact us through this email: support@yahboom.com
and our technical support will help you solve the problem.